Start with the surface, not the pose
Most slanting plank problems begin before you step onto the prop. A slant board is only as stable as what sits under it, so clear a level patch of floor and check that the plank's lower edge cannot slide. If your mat bunches or curls at the edge, smooth it flat or move the plank to a firmer surface.
The MeFree Slanting Plank is a solid pine board measuring 61 cm long, 10 cm wide and 4 cm high, weighing 0.8 kg. That footprint is narrow by design: it supports hands, wrists, feet or elbows rather than the whole body. Set it so the long edge faces the direction you will press, and leave enough floor space around it to place your hands or feet without crowding.
How to set up a slanting plank for standing poses
- Place the plank where your feet will land: For standing poses such as Tadasana, position the plank so both feet can rest on it with the slope running in the direction you want to work. The supplied product information lists Tadasana among the supported asanas.
- Check the contact under your feet: The plank's slip-resistant construction is intended to give a sound foundation for weight-bearing postures. Step on slowly and feel whether the surface grips your feet or socks before you commit weight.
- Adjust your stance, not the board: If the angle feels too steep or too shallow, first change how much of your foot rests on the plank. Moving from the ball of the foot toward the heel changes the felt angle without adding props.
- Use a wall or chair for balance: The supplied information does not describe a mounting sequence for every standing pose. If balance is uncertain, keep one hand on a wall until you feel the plank is stable under both feet.
Angle adjustment: what you can change and what you cannot
The MeFree Slanting Plank is a fixed-angle wooden prop. The supplied specifications give one size and one standard variant, with no adjustable incline mechanism. That means slanting plank angle adjustment happens around the board, not inside it: you change the height or position of your hands, feet or elbows, or you place a folded mat or block under one edge if you need a different feel.
Be honest about the trade-off. A fixed plank is simple and sturdy, but it cannot be fine-tuned the way a hinged or stacked prop can. If you need a precise, repeatable angle for a specific pose, check the angle before you buy rather than assuming the board will adjust. The supplied information does not state the plank's incline in degrees, so treat the slope as something to feel and test in your own setup.
What the MeFree Slanting Plank gives you
- Slanting Plank: Hand-finished solid pine, 61 cm length x 10 cm breadth x 4 cm height, 0.8 kg. The narrow, lightweight board is easy to reposition between standing poses and hand support, but it is not a full-platform stance board.

Slanting Plank - Slanting Plank: Slip-resistant construction intended to support weight-bearing postures on hands, wrists or feet. Grip is the main safety factor when you press into a slant board, especially in hand-supported poses.
- Slanting Plank: Used in Iyengar Yoga for support of feet and hands, and listed for Adho Mukha Svanasana, Sirsasana and Tadasana. These are the poses to test first; if your practice centers on other shapes, the plank may not be the right prop.
Common slanting plank mistakes and how to spot them
- Using it on a slippery or uneven floor: If the plank shifts when you press into it, stop. Move to a level, non-slip surface and check that the mat under it is flat. The plank's grip helps at the contact point, but it cannot compensate for a sliding floor.
- Loading the narrow edge: At 10 cm wide, the plank gives a small contact area. Placing your whole foot across the width rather than along the length can make it feel tippy. Line up your foot or hand with the board's long dimension.
- Skipping the wrist check in hand support: The plank is described as a choice for sensitive or delicate wrists, but that does not mean every wrist position feels good. In Chakra-related support or handstands, start with partial weight and notice whether the angle reduces or increases wrist pressure.
- Expecting it to replace a full backbend prop: The supplied description says the plank can assist backbends and downward dogs, but its dimensions are those of a small support, not a backbender. If you need broad support under the spine, this is not that prop.
- Ignoring elbow placement in Sarvangasana: The plank can support elbows in Sarvangasana. If the elbows slide off the narrow surface, the setup is wrong for your body, not a reason to force it.
Wrist and ankle support: what to expect
In standing poses, the plank supports the feet and ankles by giving them a sloped surface to press against. In hand-supported poses, it supports the hands and wrists. The supplied information does not give a recommended angle, weight limit or progression, so build load gradually and stop if a joint feels compressed rather than supported.
The plank is also listed as a multi-purpose prop for supporting elbows in Sarvangasana and for increasing stability in Adho Mukha Svanasana. Use those as test poses: if the plank makes the pose feel more secure, it is doing its job. If it makes the pose feel less stable, recheck the floor, the board's position and how much of your hand or foot is in contact.
Care that keeps the surface predictable
The supplied care instruction is simple: to clean or remove stains from the surface, use a damp cloth. Do not soak the pine board or leave it wet. A dry, clean surface is easier to grip consistently, and consistent grip is what makes angle changes feel safe rather than surprising.
Store the plank where it will not warp or get knocked over. At 0.8 kg it is light enough to move often, so treat repositioning as part of setup rather than an afterthought.

